- Thailand
- Home
- Global Site
- Contact
Impress and Express with Big Screen Solutions from NEC
Although it has a highly transportable, lightweight body weigning 3.5 kg, it achieves high brightness of 3000 ANSI lumens, which is sufficient for use in a bright room.(This is for the LT380. The brightness is 2500 ANSI Iumens for the LT280.)
If the position of the screen is too high or low, the projector must be installed at an angle , resulting in trapezoidal distortion of the projected images. The acceleration sensor bulit in to the main unit senses the inclination of the unit in the vertical direction and then corrects for any trapezoidal distortion in the projected images automatically (+/- 40 degrees from the projection angle). The user can set up the projector very quickly and easily since it is not necessary to correct it manually. With the 3D Reform function, it is also possible to correct trapezoidal distortion manually by clicking the Four corners of the projected image with a mouse connected to the main unit to project square images.
Without a screen, the projected images may be affected by the colours of the wall or blackboard. This projector has built-in colour correction for projecting images on a coloured wall or blackboard, so that the colour lenes of the projected images can be approximated to those projected on a white screen. The following eight colour options are avallable as user seiections blackboard , blackboard (gray), light yellow . light green , light blue , sky blue , light rose and pink
Images on the PC display can be projected without a connecting cable by installing image Express Utility 2D (IEU 2.0) on the PC as well as loading the wiraless LAN card (option) on the projector respectively, IEU 2.0 is dedicated software that is attached to the projector . The projectors support IEEE802.11g in addition to the ordinary IEEE 802.11b. Smoother image projection has been achieved by the unique compression method deveioped by NEC . The projectors support wired LAN with an iniegrated RJ - 45 connector.
By selecting the power saving" Lamp Eco Mode " power consumption can be saved and noise level can be reduced to 30 dB, so that the user can hold conferenced or classes in a quiet environment without noises from the fan (35 dB in normal use)
By using passwords , the projector cannot be used by unauthorized persons Once the secunty function is in effect, a message requesing the password is displayed when the power of the main will is lurned on this impossible to project an image unless the proper password is entered.
With an ordinary projector, it is necessary to reconnect the RGB cabtes when the presenter changes. Conversety, this projector can change presenters with a single operation . The person who wants to speak can send images from his/her PC to the projector just by clicking the "Become a Presenter
In addition to viewing the projected images on your own PC, you can also store the images on your PC, Since some margin space is available. you can take notes or prowide the minutes of a meeting.
A presenter can transmit images to not only the projector but also participants PCs, For a presentation in a large conference room, participants can confirm defails of the projected images, such as small characters, etc., with their own PCs. A presenter can distribute files or documents used in the presentation through the network.
An administrator(a teacher) can switch images on the participants' (students') PC's to be projected on a screen. With the Training mode. a single PC can control PCs that project images onto a screen . You can switch the PCs that project image or pause communication with the projector.
With image Express Utlity 2.0 (Ver. 2.0),it is possible to conduct meetings over segments and across different networks. Since the projector supports a variety of network configurations. it can easity be introduced into environments where networks have already been constructed.
The Automatic Search function searches for network projectorsEven if the desined projector is on another network it can be found with the Automatic Search function.| Model Name MultiSync LT380 | ||
|---|---|---|
| Lens | Zoom | Manual Zoom Ratio : 1 to 1.2 |
| Focus | Manual Focus (F = 1.7 to 2.0 ) (f = 24 mm to 29.0 mm) | |
| Projection Distance | 0.71m to 10.9m (Tele) 0.69m to 9.0m(Wide) | |
| Projection Angle | 10.3 to 11.2 (Wide) / 8.5 to 9.2 (Tele) | |
| Lamp | Normal Mode | 200W DC |
| Eco Mode | 152W | |
| Light Output | Normal Mode | 3,000 ANSI lumons |
| Eco Mode | 2,200 ANSI lumons | |
| Contrast Ratio | 600 : 1 | |
| Computer Input | 3 Input (2 D-Sub Mini 15 pin, DVI-D) | |
| Net Weight | Approx 3.5 kg | |
| Image Size | 21inch to 300inch (0.53m to 7.62m) | |
| Video Bandwidth | RGB : 100MHz | |
| Bulit - in Speaker | 1W Monaural | |
| Power Requirement | 100 to 240V AC, 50Hz/60Hz | |
| Input Current | 3.3A to 1.4A | |
| Power Consumption | 292W/230(Eco Model)/16W(Standby Model)/10W(Power Save Mode) | |
Mr. Apichat Sittiwong
Telephone : +66 (0) 2-259-1192 ext. 2401
E-Mail : apicharts@nec.co.th
Mr. Sittikorn Limbasuta
Telephone : +66 (0) 2-259-1192 ext. 4302
E-Mail : sittikornl@nec.co.th
